UpdatePack7R2 for Windows 7 SP1 and Server 2008 R2 SP1 22.3.11

UpdatePack7R2 Overview

The set allows you to update the operating system, and also to integrate updates into the distribution. Can be installed on any edition of Windows 7 and Server 2008 R2, any language and architecture. Includes updates for Internet Explorer 11, all critical, recommended and security updates. See the list of updates for details.

List of content

https://blog.simplix.info/update7/#contents

Usage

The system must have at least 10 GB of free space on the hard drive and preferably at least 1 GB of free RAM.
You can drag and drop a clean iso distribution onto UpdatePack7R2 and get a ready-made updated iso image.
For flexible installation of the set, you can use the following keys and their combinations:
• The /Reboot key for automatic reboot, if required.
• The /S key for completely silent installation without windows and messages. The case matters.
• The /Silent key for passive installation – progress is visible, but installation is completely automatic.
• The /Temp= key allows you to specify a temporary working directory. It does not have to be empty, but it must exist.
• The /NoSpace key allows you to skip checking for free space on the system partition, it is not recommended to use it.
• The /FixOn key enables protection against Meltdown and Spectre, and /FixOff disables it. Without the keys, protection is disabled for Win7, and enabled for Win2008R2.
Examples:
• You need to automatically install all updates, IE11 and reboot the computer: UpdatePack7R2.exe /ie11 /silent /reboot
• You need to silently install all updates to existing products, do not change the IE version, do not reboot the computer: UpdatePack7R2.exe /S
The following keys are intended for integrating updates into the distribution:
• The /WimFile= key specifies the location of the wim file, you must specify the absolute path.
• The /Index= key specifies the system index in the wim file, you must perform integration again for each index.
• The /Index=* key allows you to perform sequential integration of updates into all indexes of the wim file.
• The /Boot= key specifies the location of boot.wim for integrating NVMe and USB3 support.
• The /Optimize key allows you to optimize the size of the wim file after integrating updates.
• The /Optimize=esd key converts the wim file to esd after integrating updates.
• The /NoUSB switch cancels the integration of the universal USB3 driver from daniel_k .
Notes:
• Before specifying the index, it is useful to run the command: Dism /Get-WimInfo /WimFile:C:\install.wim (replace the path with your own).
• When updating boot.wim, you must copy the new files from the sources folder to the distribution according to the instructions .
Examples:
• You need to integrate IE11 and all updates into 1 index: UpdatePack7R2.exe /WimFile=C:\install.wim /Index=1
• You need to integrate IE11 and all updates into all indexes: UpdatePack7R2.exe /WimFile=C:\install.wim /Index=*
If the set is successfully completed, the Windows 7, Server 2008 R2 distribution or the working system will be updated to the current state.

Additional functionality

1. Automatic installation of SP1 is possible if it is not installed on the system. To do this, place the Windows6.1-KB976932-X86.exe and Windows6.1-KB976932-X64.exe files in the same directory as the set.
2. If there is UpdatePack7R2Start.cmd next to the set , it will be executed before installing updates, UpdatePack7R2Finish.cmd – after installation, UpdatePack7R2Wim.cmd – after integrating updates. Console windows will be shown by default. To hide them, the first line in the cmd file must begin with “:hide” (without quotes). The update set tracks the exit code from cmd files in case a reboot is necessary. This code is 3010 (exit 3010 command). 
3. If you want to apply your tweaks after installing Internet Explorer 11 on the working system, place the ie11.reg file in the folder with the set and it will be imported automatically. 
4. Some keys can be replaced by renaming the set file itself. So, for automatic reboot, you can add the word “–” anywhere in the name of the set file and “++” for passive installation. 
5. Installation and integration of add-ons is supported: SmartFix , DirectX , NET Framework , Visual C++ . Add-on files must be placed in the same folder with UpdatePack7R2. Examples: •You need to automatically install the set on the working system along with IE11 and reboot the computer: rename UpdatePack7R2.exe to UpdatePack7R2–++.exe •This will be absolutely similar to using the following keys: UpdatePack7R2.exe /silent /reboot

Notes

1. The size of the distribution (wim file) will be increased by the size of the installed updates.
2. Integrated updates can be removed even after the system is installed.
3. It is recommended to unload the resident antivirus monitor from memory while the kit is running.
4. A detailed update installation log is located in the %WinDir%\UpdatePack7.log file .
5. Installation on a working system will be performed in several stages with reboots.
6. There is a UefiSeven project for installing and loading the system on new UEFI devices.

Localiztion

The update package interface has been translated into the following languages:
• English
• Armenian
• Brazilian Portuguese
• Indonesian
• Spanish International
• Chinese Traditional
• Norwegian
• Russian
• Turkish
• Ukrainian
• Czech
• Estonian

Note: Only the program interface languages ​​are listed here; the updates themselves can be installed on a system with any language.
Also included is the official localization of the Internet Explorer 11 interface into 95 languages, including spell checking and word hyphenation.

FAQ

The set does not start, did not work, had to reinstall the system, all system drivers crash, completely removed the antivirus, how to edit this assembly, etc. …
The set of updates is taken from the official website of the developer, is not edited, without modifications and is provided “As is”.

Note: Using the program on the territory of the Russian Federation and the Republic of Belarus
is only possible with the Internet disconnected!

File Information

Program version: 22.3.11
Official website: simplix
Interface language: English and others
Treatment: not required

System Requirements

• Windows 7 SP1
• Server 2008 R2 SP1