Fanuc CNC GUIDE – CNC Machine Simulation and Training Software

Fanuc CNC GUIDE Overview

FANUC CNC GUIDE provides all the features of operation and control, as well as the ability to run and simulate the Programmable Machine Controller (PMC) for developing and debugging C Language Executor, Macro Executor and FANUC PICTURE PROGRAM and integration of application functions FOCAS2
Virtual Control Panel displays the input status and output signals, which when used with the FANUC LADDER III PMC programming software means that the engineer can write and test machine logic sequences “on the bench”.
It is possible to link the CNC GUIDE with other FANUC PC software such as: Program Transfer Tool, CNC Setting Tool and FANUC Built-in 3D Interference Check Setting Tool.
CNC GUIDE supports a parameter setting tool that automatically finds the optimum parameters for acceleration and deceleration. This reduces parameter setting time and allows setting up without occupying the actual machine.

Installation

Mount the image to a virtual drive. Run the setup program by calling it from SETUP.EXE.
In the CRACK folder, copy all folders and replace them with C:\Program Files (x86)\FANUC\CNC GUIDE 2.

File Information

Year/Release Date : 2024
Version : 33.10
Developer : Fanuc
Developer’s website : www.fanuc.eu/be/en/cnc/development-software/cnc-guide
Bit depth : 64bit
Interface language: English, Japanese
Tablet: present

System Requirements

OS Microsoft Windows 8.1 Professional (32bit, 64bit), Windows 10 (32 bit, 64 bit), .NET Framework 3.5
CPU Pentium® 4, 2.8GHz or more, Intel Core Duo 1.83GHz or higher (Core 2 Duo, Core i3,
Core i5, Core i7 in case of Cycle Time Estimate Function)
Main memory 2 GB RAM or more
Hard disk 8 GB or more
Screen resolution 1280 x 1024 (or higher)
1920 x 1080 recommended